Fully Integrated Stereo Amplifier: Input 550mV driving 70
watts, maximum 140 watts peak output.
Multiple Inputs: Front mounted selector switch-Tuner,
DVD, CD, and Aux. (for Tuner, TV, VCR or (Computer)
Custom Wound Audio Transformers with a core of German
grain oriented silicon steel.15th generation proprietary design. Secondary
can be configured for a 4 ohm or 8 ohm load.
State of the Art Components: High quality audio
potentiometer, gold plated RCA input jacks, gold plated five way speaker
Low Feedback Design: Only 5 dB
There are two upgrade options available for the
UPGRADE I: Resistor, capacitor and tube upgrade. The addition of a
resistor array to the input and driver tubes. Clarity Cap ESA output capacitors,
gold pin 12AX7 Tungsol tubes. Retail, $200.
UPGRADE V (highly-recommended): . Retail $250.
We think each of these upgrades builds on the excellent sound of the
standard units. The latest Upgrade V is the most exciting using the world-class Rike capacitors. These German handmade paper-oil capacitors were developed by a well-known ultra-high end audio designer who could not find capacitors good enough for his $100,000 line of electronics. Adding these caps to your JD801BRC will result in increased clarity, transparency, and a more expansive soundstage. The improvements are easily heard.
|Peak Music Power:
||140 W per channel at 8 ohms, 1KHz,
at peak 50% duty cycle
|Rated Output Power:
||70 W per channel at 8 ohms, 29Hz to
||(at 1 watt into 8 ohms) 6Hz to 48KHz
+ 1dB; 0dB at 1KHz
||14Hz to 70KHz + 3dB; 0dB = 70 W
1KHz, 8 ohms
||Less than 1% at 11V output, 49Hz to
20KHz, 8 ohms
||Ultra Linear, Class AB1
||Less than 100Kohms
||Max. 550mV at 1KHz for 70 watt
||4 ohms and 8 ohms
||Less than 5 dB
|Noise and Hum:
||70dB below rated output.
||2 pairs (4) of 6550/KT88 power
output; 1 pcs. 12AX7A preamplifier, 2 pcs. 6SN7GT power drivers.
||110V-120 VAC 60Hz 250 watts-standby,
500 watts maximum (220 VAC -240 VAC 50Hz option).
||18.25 inches (46.5 cm) wide by 13.5
inches (34.5 cm) deep by 8.5 inches (22 cm) high.
||47 pounds (21.5 Kg) net,
approximately 55 pounds (25 Kg) packaged.
||For 110/120 VAC: 6.3 amp fast blo,
for 220/240 VAC: 3.15 amp fast blow. Size: 5mm X 20mm
||One year limited parts and labor.
One year or 3,000 hours whichever comes first on Jolida Tubes.